LUFS loudness meter (with true peak)
Measure integrated LUFS, true peak and loudness range of one file or a whole batch, and see what every platform will do with it.
No file measured yet
Drop audio files here to measure their loudness
wav, flac, mp3, m4a or ogg: one file or a whole album. The files are read on this device and never uploaded.
| Platform | Target | Change | True peak |
|---|
Files
| File | LUFS | dBTP | LRA |
|---|
Press a file name to see its graph and platform table.
- File
- Measure a file to see its facts.
Graph
Live
Tab audio measures what a tab plays, such as a song in a web player, from the moment you start. The microphone measures the sound in your room, which is useful for checking a live mix but not the loudness of the original file.
Export
The CSV of all files has every value and the change each platform makes. The curve CSV has momentary and short-term loudness every 100 ms.
Recent results
How to use the LUFS meter
- Press Add files or drop files onto the tool. One song works, and so does a whole album or a folder: each file is measured in turn.
- Read the six numbers under the graph. Integrated LUFS is the one platforms use; true peak and loudness range come next.
- Look at the platform table. The Change column says how many dB Spotify, YouTube, Apple Music and the others will turn the track down or up, and True peak warns when peaks are too high for a clean MP3 or AAC copy.
- Pick a Target line to draw that platform’s level on the graph, then save a CSV of the batch or a PNG of one file.
- To measure what a web player or video plays, choose Tab audio, or choose Mic to watch the room live.
How to read the results
Integrated loudness
Integrated LUFS is the loudness of the whole file as one number. It follows the ITU-R BS.1770-4 method: the sound is filtered to match how our ears weigh bass and treble, measured in 400 ms blocks, and silent or very quiet parts are left out by two gates, so a long fade-out or a pause does not drag the number down. A pop master often reads −9 to −8 LUFS, an acoustic track −16, a TV programme −23. Files shorter than 3 seconds get a badge, because a few blocks are too few for a steady value.
Short-term and momentary
Short-term loudness uses a 3-second window and momentary loudness a 400 ms window, both updated every 100 ms. The graph draws short-term as the amber line and momentary as the thin line, and the readouts give the loudest moment of each. A chorus that hits −7 LUFS short-term in a track that reads −10 integrated tells you where the energy sits.
Loudness range (LRA)
LRA, from EBU Tech 3342, is the spread between the quiet and loud parts of the file in LU, after the quietest 10 % and loudest 5 % are left out. A heavily compressed dance track may read 3 LU, a film or a classical piece 15 LU or more. Steady test noise reads close to 0.
True peak
True peak is the highest point of the wave including the parts between samples, found with four times oversampling. It is shown in dBTP and can be higher than the sample peak. PLR, the peak-to-loudness ratio, is true peak minus integrated loudness: a small PLR such as 8 dB means a dense, squashed master.
Use cases
Before uploading to Spotify
Your master reads −8.2 LUFS with a true peak of −0.3 dBTP. The table shows Spotify turning it down by 5.8 dB, and the true-peak cell is red: for masters louder than −14 LUFS, Spotify advises staying below −2 dBTP so the lossy copy does not clip. You could lower the limiter ceiling, or master less loud, since the extra loudness is taken away anyway. Check the same file for flat tops with the clipping detector.
Podcast episode
A 52-minute stereo episode reads −19.4 LUFS. The Podcasts row asks for −16, so the table says to turn it up by 3.4 dB, and the true-peak cell checks whether the peaks would then pass −1 dBTP. If they would, a true-peak limiter at −1 dBTP does the job. For a mono episode the row switches to −19 LUFS on its own.
YouTube video audio
Choose Tab audio and play your uploaded video from the start in another tab. After the whole video the integrated value shows how loud it really plays. A voice-over at −20 LUFS is not turned up, so it sits about 6 dB under music videos; raise it in your editor before the next upload.
Tips for accurate results
Measure the final file, after the limiter and any export settings, because a lossy export can change the true peak by a dB or more. Measure the whole track: integrated loudness of 20 seconds of a chorus is not the loudness of the song. Mono files are measured as the standard says, counted once, so a mono file reads 3 dB lower than the same sound saved as two identical stereo channels. The mic mode measures the room, so its numbers depend on your speakers and where the phone sits; use files or tab audio for release checks. When you compare two masters, match their integrated loudness first: the version that is 1 dB louder usually sounds better at first, even when it is not.
What happens when a platform turns you down
Streaming services play every track at about the same loudness. When your track is louder than the target, the player simply lowers its volume, like turning a knob: nothing else changes. A master at −8 LUFS on a −14 LUFS service plays 6 dB quieter than it was made, next to tracks that kept their dynamics, so the squashed one can sound smaller, not bigger. When a track is quieter than the target, some services raise it, but Spotify only raises it as far as the true peak allows, and engineers who measured YouTube found that it does not raise quiet videos at all. Spotify also keeps the balance inside an album: when someone plays a whole album, it is turned down or up as one, so a quiet ballad stays quieter than the loud single next to it. In a playlist or on shuffle, each track is set on its own. That is why the meter gives one integrated number per file and a batch table: measure every track of a release and you can see how far each one will move in a playlist.
The target of each service, whether normalisation is on by default and how sure each figure is are in the guide to loudness targets for every platform. To check how your mix holds up in mono, use the stereo phase meter.
FAQ
What is LUFS?
Loudness Units relative to Full Scale: a loudness measure that follows how loud people hear sound, not only peaks.
What LUFS should my song be?
Many masters land between −14 and −9 LUFS. Spotify and YouTube turn louder tracks down to about −14.
Is the meter accurate?
It follows ITU-R BS.1770-4 and EBU R128, the same standard as pro meters.
What true peak should I aim for?
−1 dBTP is a safe ceiling for streaming; −2 dBTP for very loud masters.