Live RF spectrum with an RTL-SDR dongle

Plug in an RTL-SDR dongle and watch radio signals live in Chrome or Edge: spectrum, waterfall, markers and band presets.

MHz

Plug in an RTL-SDR dongle, then press Connect

Works in Chrome and Edge on a computer, and in Chrome on Android. On Windows, install the WinUSB driver once first. The browser asks which USB device to use; nothing leaves your device.

Centre—
Span—
Strongest (MHz · dBFS)—
Markers—

Tuner
Gain
Dongles with a 1 PPM TCXO, such as the RTL-SDR Blog V3 and V4, need little or none. Tune to a known station and adjust until its peak sits on the right frequency.
Markers and peaks
Click on the spectrum moves
    Display
    Bigger shows narrower signals apart (2.4 MS/s ÷ 4,096 = 586 Hz per bin).
    Averaging
    Device and export

    No dongle connected.

    The share link holds the settings only. Open a saved CSV in the trace viewer to compare scans.

    Receive only. Nothing is uploaded. Space start / stop[ ] step

    How to use the RTL-SDR page

    1. Plug the dongle and its antenna into a USB port of your computer, or into an Android phone with a USB OTG adapter.
    2. Open this page in Chrome or Edge and press Connect dongle. The browser shows a list of USB devices; pick the RTL2838 (or RTL2832) entry and press Connect.
    3. Choose a Band preset or type a centre frequency in MHz. The arrows step one span (about 2.4 MHz) up or down.
    4. Click a peak to put a marker on it, and save the spectrum with Save CSV. Press Stop to free the dongle for other programs.

    Windows: install the WinUSB driver once

    Windows loads a TV-tuner driver that a browser cannot use, so the dongle needs the WinUSB driver, the same one SDR programs use. Download Zadig from zadig.akeo.ie and run it. Choose Options › List All Devices, then pick "Bulk-In, Interface (Interface 0)" and check that the USB ID shows 0BDA 2838 (or 0BDA 2832). Choose WinUSB on the right, press Replace Driver, then unplug and replug the dongle.

    Mac, Linux and Android

    A Mac needs no driver. On Linux the TV driver grabs the dongle first, so unload it with sudo rmmod dvb_usb_rtl28xxu; if the browser then says access denied, install your distribution's rtl-sdr package, which adds rules that let your user open the device. Android needs no driver: Chrome asks for permission to use the dongle.

    No dongle yet? It draws made-up stations so you can learn the controls; it is not real radio.

    How to read the spectrum and waterfall

    M1 100.30 MHz · −38 dBFS 99.5101.1 noise floor burst waterfall: newest at the top, time runs down
    Each FM station is a hump about 0.2 MHz wide on the spectrum and a bright stripe on the waterfall.

    The spectrum is a snapshot: frequency runs across the bottom in MHz and level runs up in dBFS, where 0 dBFS is the loudest signal the dongle's 8-bit converter can hold. The grassy line along the bottom is the noise floor; anything that rises above it is a signal. A steady carrier is a thin spike, an FM station is a hump about 0.2 MHz wide, and digital signals look like flat-topped blocks.

    The waterfall adds time. Each update draws a new row at the top, coloured by level, and older rows slide down, so a station that is always on makes a stripe and a remote control makes a short dot. That is the easiest way to catch signals that only last a moment. With two markers placed, the readout shows the gap between them in kHz and their level difference in dB. The peak list names the strongest signals; click one to put the marker on it.

    Use cases

    FM band scan

    Choose the FM broadcast preset and step from 88 to 108 MHz. At 2.4 MS/s each view covers about 2.4 MHz, so several stations fit on the screen at once, and about nine steps cover the band. Strong local stations stand well over the noise; distant ones are small humps. Save a CSV at each step to compare antennas in the trace viewer.

    Find a 433 MHz remote

    Choose the 433 MHz ISM preset and press the button on a car key, a gate opener or a weather station. The burst shows as a short bright line on the waterfall near 433.92 MHz, and with peak hold on, it stays on the spectrum after it ends. If you see nothing, move the antenna closer; a key fob can be weak, and some use 315 or 868 MHz instead.

    Airband

    Aircraft and towers talk in AM between 118 and 137 MHz. The airband preset starts at 124 MHz; step up and down. Transmissions come and go, so leave the waterfall running for a minute and watch for short stripes at the channels near your airport. This page shows the signals but does not play them as sound yet.

    Check a noisy charger

    Cheap phone chargers and LED drivers can spray noise across the radio bands. Tune to a quiet part of the FM or airband range, note the level of the noise floor, then plug in the charger near the antenna. A floor that jumps by several dB, or a comb of evenly spaced spikes, points to the charger. Unplug it again to confirm.

    Limits of a cheap dongle

    An RTL-SDR is a receiver built from a TV stick, so it has limits. It shows at most about 2.4 MHz at once; wider views need stepping. Its 8-bit converter gives roughly 50 dB between the strongest and the weakest signal it can show at the same time, so a strong station nearby can raise the floor or appear a second time at another frequency (an image or a spur). Lower the gain if you see the Overload badge. Levels are in dBFS, not calibrated dBm, so use them to compare, not to measure power. It cannot transmit, and the frequency can be off by a few PPM until you correct it.

    RTL-SDR Blog V4

    A popular RTL-SDR dongle with an R828D tuner and a metal case. The maker lists coverage from about 500 kHz to 1.7 GHz; on this page it works from 29 MHz up, because its built-in HF upconverter is not switched here yet.

    Check price on Amazon

    We may earn a commission if you buy through these links. It does not change the price.

    For a calibrated instrument with a wider sweep, see the hardware analyzers guide. To open scans from other devices, use the trace viewer, and to plan your router, see WiFi channels. All RF tools are on the RF tools and calculators page.

    FAQ

    Which browsers work?

    Chrome and Edge on Windows, Mac, Linux and Android (WebUSB). Safari and Firefox cannot talk to USB devices.

    Which dongles work?

    RTL2832U dongles with an R820T, R820T2 or R828D tuner, such as the RTL-SDR Blog V3 and V4 and most generic DVB-T sticks. Older sticks with an E4000 or FC0012 tuner are not supported yet.

    Do I need drivers?

    On Windows, install the WinUSB driver once with Zadig (steps above). Mac and Android need none. On Linux, unload the TV driver first (steps above).

    Can I listen to FM radio?

    Not yet; audio demodulation is planned. Today the tool shows the spectrum and waterfall.

    Is it legal?

    Receiving is legal in most countries; some bands (like police or cell phone) may be restricted to listen to. Check your local rules.

    Written and tested by the SpectrumAnalyzer.app team · Last checked

    How we tested: Checked with simulated I/Q data in the dongle's own 8-bit format (a tone 200 kHz above the centre shows at exactly that frequency and level) and the USB commands checked against the formulas of the open-source librtlsdr driver. It has not yet been tested with a real dongle.