Directory

All free tools

Here is every tool on the site in one place: analyzers for live sound, tests for speakers and rooms, checks for audio files, decoders and calculators for radio work. Type what you want to do, or tap a filter. Every tile opens its tool right away; a tile marked Soon is still being tested.

Audio analyzers

Live and file analyzers that show what is in a sound: frequencies, changes over time, bands and the wave itself. 8 tools, 8 live

Speaker & audio tests

Tests for speakers, headphones and audio gear, using your mic and test tones played by the page. 5 tools, 5 live

Audio file checks

Checks for audio files: real lossless or not, clipping, loudness for streaming and stereo phase. 4 tools, 4 live

Room acoustics

Measure and plan a room: reverb time, bass modes and the octave bands used in acoustics. 3 tools, 3 live

Signal decoders

Decoders that turn tones into text or numbers: Morse code, phone keypad tones and engine speed. 3 tools, 3 live

RF tools

Tools for radio work: spectrum traces, an RTL-SDR live view and the everyday RF calculators. 12 tools, 12 live

Learn

Hands-on tools that explain how FFT, windows and Fourier series work, with live pictures. 3 tools, 3 live

Which tool should I use?

Start from the job you want to do. Each row below names the tool that answers it fastest, with a short reason.

I want to…Use…
See which frequencies are in a sound right now, with note namesLive Spectrum Analyzer: the strongest peaks, a level meter and the top 5 tones as you play.
Find out if a buzz is 50 or 60 Hz mains humLive Spectrum Analyzer with the Mains hum preset: it marks the hum and its harmonics at 100, 150 Hz or 120, 180 Hz.
See a voice, a bird call or a sweep change over timeSpectrogram: a scrolling colour picture you can pause and scroll back 60 seconds.
Check what is inside a song or a recordingAudio File Spectrum Analyzer: average spectrum, noise colour, stereo and file facts.
EQ a speaker, a PA or a room with pink noiseReal-Time Analyzer (RTA): 31 bands of 1/3 octave with target curves.
Look at the shape of a wave and spot clippingOnline Oscilloscope: trigger, time and level knobs, plus XY mode for stereo.
Check if a FLAC download is really losslessFake FLAC Checker: a file made from an MP3 shows a sharp cut near 16 kHz.
Make a track the right loudness for Spotify or YouTubeLUFS Loudness Meter: integrated LUFS and true peak against each platform’s target.
Measure how long a room keeps echoingRT60 Reverb Time Meter: one clap gives the decay time per octave band.
Turn a radio power level in dBm into watts or voltsdBm Converter: every unit at once, for 50 or 75 ohm systems.

How these tools keep your files private

Every tool does its work inside your own browser. When you open a file or press Listen, the sound is measured on your device and is never uploaded, so a private recording stays private. There is no sign-up and no account.

The only things the site saves are small settings in your browser, such as your theme, your last presets and the tools you opened last, so they are there next time. You can clear them at any time. The privacy policy lists everything.

How new tools are added

A tool goes live only after it gives the right answer on our test sounds, for example 1,000.0 Hz for a 1 kHz tone, and works on phones and computers. Until then its tile says Soon and is not a link. When it passes, the tile turns into a link here, in the Tools menu and on its hub page.

FAQ

Do I need to install anything?

No. Every tool runs in a modern browser on a phone, tablet or computer. There is no app to download and no account to make.

Which tools need a microphone?

The live tools: the analyzer, spectrogram, RTA, scope, the speaker tests and the decoders. File checks need a file, and the calculators need nothing at all. Use the “Works with mic” and “No mic needed” filters above to see which is which.

Why do some tools say “Soon”?

We publish a tool only when it is fully tested. New tools go live every week, and a Soon tile turns into a link on the day its tool is ready.

Can I use the tools offline?

Yes. After you open a tool once, your browser keeps a copy, so it also works without internet.

Written and tested by the SpectrumAnalyzer.app team · Last checked